Green home building should rely on recycled materials


The recycleables accustomed to create a building product, and where those recycleables originate from, are essential green criteria, and in all likelihood the very best known.

When lots of people think about green building products, believe that of productsmade fromrecycled content. This category includes salvaged materials and merchandise produced from agricultural waste materials.

Products with recycled content. Recycled content is a vital feature of numerous green products, indicating that the recycleables were recovered from the waste stream.

From an eco standpoint, post-consumer is superior to post-industrial (pre-consumer) recycled content, because post-consumer recycled materials are more apt to be diverted from landfills.

Salvaged products. Once we can reuse a product rather than creating a new one from recycleables, we save resources and. From an eco standpoint, a salvaged product is generally better than the usual recycled-content product, because significant energy didn't need to become invested in re-manufacturing it.

Many salvaged products used in buildings (bricks, millwork, framing lumber, plumbing fixtures, and period hardware) can be found through local or regional salvage yards, even though some are marketed nationally.

Certain salvaged goods are not advised, including toilets, faucets, and windows, since services conserve water or energy throughout the use phase of the building.With salvaged wood products, bear in mind that lead paint might be present.

Products produced from agricultural waste materials. Numerous building goods are considered green since they're based on agricultural waste material. Various particleboard goods are available, for instance, that are manufactured from straw (the stems left after harvesting cereal grains). Rice hulls bring strength in some recycled- plastic decking products, and citrus peels are utilized to produce the raw material in some natural finishes.

Legal Disclaimer

Our website is not responsible for the information contained by this article. Articleinput.com is a free articles resource thus practically any visitor can submit an article. However if you notice any copyrighted material, please contact us and we will remove the article(s) in discussion right away.

Note: This article was sent to us by: Larry Edwards at 04202011

Related Articles

1. Hiring a builder to build a green home
Design-build firms provide both home construction and design services. If you don't go for this kind of approach - or if your design-build firm with expertise in green buil...

2. Building a new green home or renovating an old one
From an eco standpoint, every building project has environmental impacts. Green building is, really, a problem of attempting to maintain those impacts to a minimal level. B...

3. Regulatory constraints of green building
While you examine potential properties for that ideal building site, it's also wise to check out the land-use regulations that govern what can and can't be achieved in the ...

4. Configuring your new green home
What will the basic form of your house be? Is is tall and boxy? Low and disseminate? Long and narrow, or roughly square? They are fundamental questions that may hav...

5. Rigid foam insulation for green homes
Rigid foam insulation increases the insulating value per inch of thickness and therefore helps maintain highly insulated walls from being too thick. Most often, one or two...

6. Structural insulated panel construction for green homes
Although structural insulated panels (SIPs) were originally developed for enclosing timber frames, manufacturers quickly realized that, because the panels had oriented stra...

7. Using concrete for green homes
Concrete masonry unit Currently, the 2nd most typical building system for houses in the US (after conventional wood framing) is concrete masonry unit (CMU) constr...

8. Insulation options for green homes
Providing a very insulated, airtight building envelope (the insulated walls, roof, and floors that surround the living area) may be the number one priority in designing an ...